SHQ-25 piezoelectric accelerometer is designed for long-term vibration monitoring of high-speed rotating machines such as aeroengines, gas turbine generators and the like.
It uses a symmetrical output form to eliminate power interference, electromagnetic noise and ground loop noise, especially suitable for industrial use. It has good heat resistance. High installation of resonant frequency and a wide range of frequencies.
Accelerometer with a stainless steel shell, all-welded gas-tight structure can therefore be used in humid, corrosive environments.
▲ frequency response: 2 ~ 8000Hz
▲ charge sensitivity: 10pc / g ± 5%
▲ temperature response: B ≤ ± 5% (0 ~ 300 ℃)
C type ≤ ± 5% (0 ~ 160 ℃)
▲ maximum lateral sensitivity ratio: ≤ 5%
▲ amplitude linearity: ≤ 3% (50g or less)
▲ Weight: ≤100g
▲ Installation: Three ø4.5 through holes are distributed on the circumference of ø30.
▲ output mode:
Two core symmetrical output, with the shell isolated, when the accelerometer from the mounting base toward the body of a certain acceleration, the right output column
(In this case the accelerometer mount faces downward, facing the output jack) is "+" pole.
▲ output impedance:
The minimum room temperature is 5 × 107Ω
▲ maximum temperature:
Accelerometer: Type B 400 ℃
C type 200 ℃
Low-noise cable is 200 ℃